1、宽导轨保证加工刚性；
2、高强度铸铁，时效处理；
3、导轨高频淬火，镶贴优质耐磨片，降低爬行；
4、优化润滑系统。
型号 Model | CA6140 | CA6150 | CA6161 | CA6166 | CA6180 | |
| 床身上最大工件直径 Max. Swing over bed | 400mm | 500mm | 610mm | 610mm | 610mm | |
| 刀架上最大工件直径 Max. Swing over carriage | 210mm | 300mm | 370mm | 400mm | 540mm | |
| 最大工件长度Max.Lengthof workpiece | 750mm or 1000mm or 1500mm or 2000mm or 3000mm | |||||
| 床身宽度 Width of bed | 400mm | |||||
| 刀杆截面 Section of turning tool | 25X25mm | |||||
| 主轴 Spindle | 主轴转速范围 Spindle speeds | 11—1600 r/min (24 steps) | ||||
| 主轴内孔 Hole though spindle | 52mm(80mm) | |||||
| 主轴孔锥度 Spindle taper | Morse No.6 (莫氏6号) | |||||
| 进给 Feed | 进给数量 No. of feeds | 64种(kinds)(for each) | ||||
| 公制螺纹Range of metric threads (kinds) | (1-192mm)44种(44kinds) | |||||
| 英制螺纹 Range of inch threads(kinds) | (1-24tpi)21种(21kinds) | |||||
| 模数螺纹 Rage of module threads(kinds) | 0.25-48(模数39种)(Module 39 kinds) | |||||
| 径节螺纹 Rage of Diametral pitc threads (kinds) | 1-96DP(37种)(37 kinds) | |||||
| 床尾 Tailstock | 床尾主轴最大行程 Max tailstock spindle travel | 150mm | ||||
| 床尾主轴直径 Tailstock spindle diameter | 75mm | |||||
| 床尾主轴孔锥度 | Morse No.5 (莫氏5号) | |||||
| 主电机 Main motor | 7.5KW(10HP) | |||||
| 包装外形尺寸Picking dimensions (L×M×H mm) | Overall dimensions for 750 | 2440X1150X1170 | 2440X1150X1700 | 2440X1190X1700 | 2440X1150X1900 | 2440X1150X1950 |
| Overall dimensions for 1000 | 2650X1150X1700 | 2650X1150X1700 | 2650X1190X1700 | 2650X1150X1900 | 2650X1150X1950 | |
| Overall dimensions for 1500 | 3150X1150X1700 | 3150X1150X1700 | 3150X1190X1700 | 3150X1150X1900 | 3150X1150X1950 | |
