C6系列普通车床 C6136D 卧式车床
1.加宽导轨保证加工刚性；
2.高强度铸铁，时效处理；
3.导轨高频淬火，镶贴优质耐膜片，降低爬行；
4.优化润滑系统。
规格 Specifications | Gap | Straight | Gap | Straight | Gap | Straight | Gap | Straight | |
C6232D | C6132D | C6236D | C6136D | C6240D | C6140D | C6250D | C6150D | ||
中心高 Center height | 160mm | 180mm | 200mm | 250mm | |||||
床身上最大工件直径 Max. Swing over bed | 320mm | 360mm | 400mm | 500mm | |||||
刀架上最大工件直径 Max. Swing over carriage | 190mm | 190mm | 210mm | 210mm | |||||
马鞍槽最大工件直径 Max. Swing in gap | 520mm | - | 540mm | - | 560mm | - | 590mm | - | |
马鞍槽有效长度 Effective gap length | 200mm | - | 200mm | - | 200mm | - | 200mm | - | |
最大工件长度 Max. Length of work piece | 500mm or 750mm or 1000mm or 1500mm | ||||||||
床身宽度 Bed width | 310mm | ||||||||
主轴孔锥度 Spindle taper | MT 6 | ||||||||
主轴通孔直径 Thru-hole of spindle | 52mm | ||||||||
转速范围 Spindle speeds | 30—1600 r/min (12 steps) | ||||||||
横刀架行程 Cross travel | 240mm | ||||||||
小刀架行程 Compound travel | 140mm | ||||||||
尾座顶尖行程 Tail stock center sleeve travel | 90mm | ||||||||
尾座套筒锥度 Tail stock center sleeve taper | MT 4 | ||||||||
电机功率 Motor | 3/4KW | ||||||||
公制螺纹 Range of metric threads (kinds) | 0.45-20mm(30) | ||||||||
英制螺纹 Range of inch threads(kinds) | 80-1.75 n/ I” | ||||||||
纵向进给量 Long. Feed per spindle rev. | 0.04-2.16mm | ||||||||
横向进给量 Cross feed per spindle rev. | 0.02-1.08 mm | ||||||||
外形尺寸 | Overall dimensions for 500mm | 1700*1130*1200 mm | |||||||
Overall dimensions for 750mm | 2000*1130*1540 mm | ||||||||
Overall dimensions for 1000mm | 2250*1130*1540 mm | ||||||||
Overall dimensions for 1500mm | 2800*1130*1540 mm | ||||||||
净重 | Net weight of 500mm | 1200kg | 1300kg | 1500 kg | |||||
Net weight of 750mm | 1400kg | 1500kg | 1700kg | ||||||
Net weight of 1000mm | 1500kg | 1600kg | 1700kg | ||||||
Net weight of 1500mm | 1700kg | 1800kg | 2000kg | ||||||
